Use this Banjo FM100 Flow Meter to accurately and precisely disperse your chemicals. Equipped with female pipe thread making it is easy adapt to your current spraying system. 

• ±1% of reading (between 10% and 100% of maximum flow)
• ±3% of reading (between cutoff and 10% of maximum flow)
• Displays overall total volume — batch total volume!
• Easy to change six (6) AA batteries.
• Flow rate allows for Gallons or Liters Per Minute.
• Glass-reinforced polypropylene.
• Measures water and most conductive liquids.
• No moving parts to fail during use.
• Self calibrating meter.
• Temperature range from 0º — to 150º F.
• Maximum operating pressure is 200 PSI
• The display reads — digits for Rate, — digits for Total and — decimal place reading in tenths.
• There are — photoeyes located on the face of the flowmeter. Note: These are not push butt N, to activate you must hold your finger over the photoeye for 2-4 Seconds.

Thread size: 1" Female NPT inlet and outlet

Max operating pressure: 200 psi

Flow range: 2.3 to 110 gpm