Use this Banjo MFM100 Flow Meter to accurately and precisely disperse your chemicals. Equipped with manifold ports making it is easy adapt to your current spraying system. 

• ± 1% of reading (between 10% and 100% of maximum flow)
• ± 3% of reading (between cutoff and 10% of maximum flow)
• Displays overall total volume and batch total volume
• Easy to change six (6) AA batteries
• Flow rate allows for Gallons or Liters per Minute
• Glass-reinforced polypropylene
• Measures water and most conductive liquids; will not read petroleum-based liquids
• No moving parts to fail during use
• Self-calibrating meter
• Temperature range: 0º to 150º F
• Maximum operating pressure: 200 PSI
• The display reads 6 digits for rate, 8 digits for total, and 1 decimal place in tenths
• There are 3 photoeyes located on the face of the flowmeter. Note: These are not push buttons; to activate, hold your finger over the photoeye for 2–4 seconds
• It is recommended to have at least 10× the diameter of straight pipe before and after the flow meter